Anderson STACKPRO 5400, Руководство по диагностике

Страница: 50 / 60

ERROR CODE Functionnalities What this error mean and what to do
LS_DP_M
Detects the position of the
unloading platform when reaching
45 degree in order to release the
partial load to securely slide to the
bottom of the platform / or when
reaching 90 degree to prevent
from over « pushing » the stack
backward
•
When main dumping platform is down
•
LS DP B sensor status in diagnosis mode is
GREEN and LED sensor light is ON
•
LS DP M sensor status in diagnosis mode
GREEN but LED sensor light is ON
•
When reaching 45 deg during unloading
•
LS DP B sensor status in diagnostic mode is
RED, and LED sensor light is off
•
LS DP M sensor status in diagnosis mode RED
and LED sensor light is OFF
•
When reaching 90 deg
•
LS DP B sensor status in diagnostic mode is
RED, and LED sensor light is off
•
LS DP M sensor status in diagnosis mode is
GREEN and LED sensor light is ON
Inspect sensor LS_DP_B by CLICKING HERE
Inspect sensor LS_DP_M by CLICKING HERE
LS_PO_R
Detects the bale pusher is
retracted in stand-by position. The
bale pusher move the bale towards
the front on the loading table in
order to make room for the next
bale to come
Inspect the sensor – CLICK HERE
LS_PD_R
Detects the unloading pusher when
it is retracted
Inspect the sensor – CLICK HERE
LS_DP_B
Detects when the unloading
platform is at
it’s lowest position.
Inspect the sensor – CLICK HERE
Search by “error code” what is the
problem # 006
50
Scroll down for more error code on next page