Anderson RBMPRO 2000, Руководство оператора

Страница: 88 / 101

88 Operator's Manual – Self-loading Trailer Anderson Group
7.5 Adjusting the shock absorber slide chain tension
After the first 50 hours of use and every 100 hours thereafter, you will need to adjust the shock
absorber slide chain tension.
To adjust the chain tension:
1. Loosen the bolts on the side of the loading arm (A, Figure 53).
2. Tighten the tension bolt (B, Figure 53) until the correct tension is reached.
3. Tighten the bolts (A, Figure 53).
Figure 53 — Adjusting the Shock Absorber Slide Chain Tension
7.6 Tire pressure
Check the tire pressure before each use. The pressure should be 3.1 bar (45 psi).
7.7 Maintaining and adjusting the axles
7.7.1 Assembling and attaching the wheels
Your trailer axles have washer nuts (model with the optional brakes) or tapered nuts (model without
the optional brakes), as shown in Figure 54. Table 16 shows the correct tightening torque for the
socket and wheel stud dimensions. The last two columns in Table 16 show the length of the lever
and the force to use when a torque wrench or pneumatic drill cannot be used.
The holes in the rim must be countersunk to fit the spherical part of the washer or the tapered part
of the nut. The nuts are tightened once the spherical part of the washer or the tapered part of the
nut is in the countersunk hole.