Anderson RBMPRO 2000, Руководство оператора

Страница: 27 / 101

Anderson Group Self-loading Trailer – Operator's Manual 27
2.3 Safety tips for hitching
The hitching area involves pinching and crushing
hazards.
Do not stand between the tractor and the machine
during a tractor lifting procedure, regardless of
whether it is controlled from inside the cab or
outside the tractor.
l
The equipment must be hitched to the tractor using only the intended hitch points.
l
Ensure that the equipment is compatible with the tractor (minimum engine power, hitch type,
tractor PTO specifications, etc.).
l
Do not stand between the tractor and the equipment without first putting the gearshift in
neutral and applying the parking brake on both the tractor and the equipment.
l
When positioning the equipment, select the slowest possible speed on the tractor.
l
Before hitching the equipment, ensure that the tractor lift controls are set so that the tractor
cannot move during the process.
l
Once the equipment is hitched, lock the coupling device. Check that the hitch is correctly
locked and in good condition before moving.
l
Ensure that hitching the equipment will not overload or improperly distribute weight on the
tractor, which could compromise stability.
l
Hitching the equipment changes the weight distribution. Do not exceed the maximum load per
axle (see the tractor manufacturer's instructions).
l
Do not exceed the maximum load permitted on the hitching points.
l
If necessary, place ballast weights on the supports provided in accordance with the tractor
manufacturer’s instructions.
l
When hitching the machine, install all the support and stability equipment to prevent
instability.
2.4 Safety tips for maintenance and repairs
2.4.1 General
Moving parts involve pinching and cutting hazards.
l
Maintenance and repairs must be performed by qualified individuals.
l
Always keep the equipment and its accessories in perfect condition.
l
Keep the oil tanks clean.
l
Follow the maintenance intervals.