Anderson RBM Series, Руководство оператора

Страница: 54 / 87

54 Operator's Manual – Self-Loading Trailer Anderson Group
5.3 Unloading bales
To unload bales, make sure to select flat terrain
without obstacles (e.g. power lines). Ensure that
the tractor has enough space to move forward until
all the bales are unloaded.
NOTE: Ensure that the handbrake has been disengaged before
moving the trailer.
Bales are unloaded using the tractor's hydraulic controls (see "Controls" on page 49).
To unload bales:
1. Stop the trailer where you want to begin unloading bales.
2. Operate the control to raise the platform.
3. Once the platform is all the way up, move the pusher to the rear and slowly move forward to
deposit the bales on the ground.
NOTE: The loading arm must be halfway through its travel before
the pusher can be moved.
NOTE: To move the RBM2000 pusher to the rear, press lightly on
the Fingertip joystick three times and continue pressing
until the pusher reaches the back of the trailer. To bring the
pusher back to the front, press lightly on the Fingertip
joystick three times, and the pusher will automatically
return to its original position.
The pusher can be stopped from automatically moving at
any time by pressing the Fingertip joystick once in either
direction.
4. When all the bales have been unloaded, make the platform horizontal and bring the pusher
back to the front.