Anderson RBM Series, Руководство оператора

Страница: 28 / 87

28 Operator's Manual – Self-Loading Trailer Anderson Group
l
Disengage the PTO and uncouple the drive shaft from the PTO;
l
Disconnect the hydraulic supply hoses;
l
Wait for all moving parts to come to a complete stop;
l
Place the support and stabilizing devices (wedges, stand, etc.);
l
Let the gearboxes and hydraulic components cool, as well as any other parts of the
machine that may be hot.
2.4.2 Welding
When welding, place the grounding device as close
to the welding area as possible.
Before welding the equipment or working on the
electrical system, disconnect the tractor power
supply and remove the control module.
l
For welding operations on the equipment or tractor, disconnect the battery or electrical power
supply and protect the lines (especially rubber hoses) to prevent them from being damaged
by sparks, which could cause a loss of oil, hydraulic fluid, etc.
l
Move any combustible materials (hay, organic matter, gasoline, etc.) away from the area
before welding.
l
Eliminate any risk of fire.
2.4.3 Electrical
l
Before starting work on the electrical system, disconnect the battery or electrical power
supply.
2.4.4 Hydraulic
A pressurized oil leak can penetrate the skin and
cause serious injury. In the event of injury, see a
physician immediately to prevent serious infection.
Do not use your hands to locate leaks in a hydraulic
line.
l
Turn off the engine and remove the key from the ignition before beginning work on the
hydraulic system.
l
Before working on the hydraulic system, ensure that it is not pressurized. Relieve the pressure
before disconnecting the hydraulic lines.
l
Before repressurizing the hydraulic lines, ensure that all the couplings are correctly tightened.
l
Check the hydraulic lines regularly and replace them if they are damaged.
l
The replacement lines must meet the manufacturer's technical requirements.