Anderson RBM Series, Руководство оператора

Страница: 31 / 87

Anderson Group Self-Loading Trailer – Operator's Manual 31
3 Getting started
3.1 Hitching to the tractor and unhitching
Use extreme caution when hitching and unhitching
the equipment.
Before proceeding, securely immobilize the
equipment with the devices provided.
NOTE: The instructions in this manual for hitching the equipment
to the tractor are provided solely for illustrative purposes.
NOTE: For best results, ensure that the trailer is level when it is
hitched to the tractor.
NOTE: Ensure that the tractor meets the required specifications
before hitching the equipment (see "Connecting the
hydraulic and electrical systems" on page 33).
To adjust the position of the trailer hitch, see "Adjusting the hitch" on page 37.
To adjust the position of the trailer jack, see "Adjusting the jack height" on page 38.
To hitch the equipment:
1. Place the tractor in front of the equipment so that its drawbar is facing the equipment tongue.
2. Chock the wheels and apply the trailer handbrake (if applicable).
3. Insert the hitch pin (Figure 6-1) and secure it with a cotter pin (Figure 6-2).
4. Attach the safety chain (Figure 6-3) between the trailer and the tractor using the provided
anchor points.
5. Put the trailer's support jack in transport position (Figure 7).
6. Remove the wheel chocks and disengage the trailer handbrake (if applicable).
To unhitch the equipment:
1. Position the equipment on a level and stable surface, turn off the tractor engine and relieve
the pressure in the hydraulic hoses.