ANDERSON-NEGELE NSL -FR, Руководство по эксплуатации

Страница: 12 / 20

NSL-F Series Operating Manual 12
7
Installation of the „Large User Interface“ (LUI)
1. Remove the plastic cover (continue with step 4), or remove the puck with the mounted small dis-
play (continue with step 2)
2. Remove the small display
3. Install the puck in the sensor head
4. Mount the large display
Hot-plug function: The large display can be installed while the sensor is energized, but this requires the
usual precautionary measures when working with electronic components.
If the display is being installed while energized, it is necessary to press both buttons simultaneously
for > 10 s after the display is installed to activate the display.
7.1 Retrofitting the display if a display was not yet installed
After removing the plastic cover, the large display can be inserted in the head of the sensor. The tabs
(Fig. 2) must be inserted in the appropriate openings on the puck (Fig. 1). Then the display can be easily
pressed onto the puck. No wiring is required.
Note : After the Large User Interface is mounted, the sensor can only be operated on this display since
the display conceals the connector for the MPI-200 adapter. If operating the sensor using the program-
ming software is preferred, the display must be removed. Then the connector of the programming
adapter can be plugged in
Remove the plastic cover: To do so, bend the tabs
slightly inwards with a screwdriver to be able to
remove the cover easily.
fig. 1
fig. 2