ANDELI MIG-270TPL, Руководство пользователя

Страница: 7 / 27

6
Note: The welding duty cycle is the percentage of actual continuous welding time that can occur in a ten-minute cycle.
For example: 15% at 200amps- this means the welder can weld continuously at 200 amps for 1.5 minutes and then the
unit will need to be rested for 8.5 minutes.
The duty cycle can be affected by the environment in which the welder is used. In areas with temperatures exceeding
40
℃
, the duty cycle will be less than stated. In areas less than 40
℃
, higher duty cycles have been obtained.
All tests on duty cycles have been carried out at 40
℃
with a 50%. So in practical working conditions the duty cycles
will be much greater than those stated above.
TYPE
MIG-270TPL
Power supply voltage (V)
single-phase
220V

15%
Input current (A) 35
Power supply capacity (KVA) 8
Current adjustment range (A) 50
～
200
Output voltage (V) 15
～
24
Rated output current (A) 200
Rated output voltage (V) 24
Rated duty cycle (%)
30
Power factor 0.75
Efficiency (%) 85
Wire feeder type
External/Internal
拉丝
分体
Post-flow time (s) 1
Welding wire diameter (mm) 0.6/0.8/1.0
Machine size (mm) 480×310×430
Machine weight (kg)
15
Plate thickness (mm) ≥0.8
Insulation class H
Protection class IP21S