ANDELI MIG-270TPL, Руководство пользователя

Страница: 3 / 27

2
1.SAFETY
Welding and cutting is dangerous to the operator, people in or near the working area, and the surrounding,
if the machine is not correctly operated. Therefore, the performance of welding/cutting must only be
under the strict and comprehensive observance of all relevant safety regulations. Please read and
understand this instruction manual carefully before the installation and operation.
·The switching of function modes is possibly damaging to the machine, while the
welding operation is performed.
·Do disconnect the electrode-holder cable with the machine, before the
performance of welding.
·A safety switch is necessary to prevent the machine from electric-leakage.
·Welding tools should be of high quality.
·Operators should be qualified.
Electric shock: It could be fatal!
·Connect the earth cable according to standard regulation.
·Avoid all contact with live electrical parts of the welding circuit, electrodes and
wires with bare hands. It is necessary for the operator to wear dry welding
gloves while he performs the welding task.
·The operator should keep the working piece insulating from himself/herself.
Smoke and gas generated while welding or cutting: harmful to people’s health.
·Avoid breathing the smoke and gas generated while welding or cutting.
·Keep the working area well ventilated.
Arc rays: harmful to people’s eyes and skin.
·Wear welding helmet, anti-radiation glass and work clothes while the welding
operation is performed.
·Measures also should be taken to protect people in or near the working area.
.
Fire hazard
·The welding splash may cause fire, thus remove flammable material away from
the working place.
·Have a fire extinguisher nearby, and have a trained person ready to use it.
Noise: possibly harmful to peoples’ hearing.
·Noise is generated while welding/cutting, wear approved ear protection if noise
level is high.
Machine fault:
·Consult this instruction manual.
·Contact your local dealer or supplier for further advice.