AND UT-201BLE-A, Инструкция по эксплуатации

Страница: 15 / 148

English 13
Measurements
Predictive Measurement
1. Press the switch.
When the last measurement is stored,
it is displayed approximately two
seconds.
2. Wait until " " is displayed.
3. Put the temperature sensor on the
mouth floor (under the tongue, at the
root of the tongue and at the side of
the lingual frenulum).
Close the mouth gently.
4. keep the sensor position during
measurement for approximately
30 seconds.
5. The count down indicator is
displayed.
The predictive measurement
mark blinks and rotates.
6. The result is displayed for
approximately 15 seconds, the
predictive measurement mark lights,
the LED of the switch blinks
and buzzer sounds when the
predictive measurement finishes.
7. Select an operation.
Press the switch to turn off the thermometer.
Keep the sensor position to use the equilibrium
measurement. Proceed to next page.
Ready
The result
Mark lights
Last data
Sensor position
Count down indicator
Measurement start
To next page if the equilibrium
measurement is used.
Turn on the device.
Predictive
measurement mark