Ancona Gourmet 24", Руководство пользователя и инструкции по установке

Страница: 37 / 39

— 37 —
Before Calling for Service
Before calling for service, review this list. It may save you both time and expense. This list includes common experiences
that are not the result of defective workmanship or materials in your appliance.
NOTHING WILL OPERATE
• Is the electrical supply disconnected?
Verify that electrical wires are connected to the mains
properly. See “Connect to AC” section. If the problem
continues, contact a qualified technician.
• Is the household fuse blown or circuit
breaker tripped?
Replace the fuse or reset the circuit breaker. If the
problem continues, contact a qualified technician.
• Is the main or regulator gas shut-off valve in the
off position?
See “Gas Connection” section and rotate to the
On position.
• Is the range properly connected to the gas supply?
Contact a qualified technician. See “Gas
Connection” section.
SURFACE BURNERS WILL NOT LIGHT
• Is this the first time the surface burners have been used?
Turn on any one of the surface burner knobs to release
air from the gas lines.
• Did you push in on the knob before turning?
The knobs require that they are pushed in before
rotation to prevent accidental turning.
• Are the burner ports clogged?
Clean the burner rings and caps as stated in the “Care
and Maintenance” section.
SURFACE BURNERS ARE UNEVEN,
YELLOW AND/OR NOISY
• Are the burner ports clogged?
Clean the burner rings and caps as stated in the “Care
and Maintenance” section.
• Are the burner caps positioned properly?
See “Burner Rings and Caps Replacement” section.
• Is propane gas being used?
The range may have been converted improperly.
Contact a qualified service technician. See “Liquefied
Petroleum (Propane) Gas Conversion” section.
SURFACE BURNER MAKES
POPPING NOISES
• Is the burner wet?
Burners cannot operate or light if wet, so let
completely dry.
OVEN MAKES POPPING NOISES
• This is normal
This is the sound of the metal heating and cooling during
both the cooking and Off functions, and is normal.
EXCESS HEAT AROUND COOKWARE
ON COOKING SURFACE
• Is the cookware the proper size?
Use cookware about the same size as the surface
cooking area, element or surface burner. Cookware
should not extend more than 1/2” (1.3 cm) outside the
cooking area.
COOKING RESULTS NOT WHAT
EXPECTED
• Is the proper cookware being used?
Use the proper cookware as shown on page 29.
• Is the Temperature knob set to the proper heat level?
Push in and rotate the Temperature knob to the desired
setting and let the oven preheat until it reaches the
temperature before you begin cooking.
• Is the Cooking knob set to the proper setting?
Push in and rotate the Cooking knob to the desired
setting; see pages 31 to 32 for description of icons.
• Is the range level?
Level the range as shown on page 15.
OVEN WILL NOT OPERATE
• Are the oven controls set correctly?
See pages 30 to 32 to make sure the knobs are set
as intended.
• Is the Oven Timer set?
Oven will not operate when the Oven Timer is set; see
page 28.
COOLING FAN RUNS DURING BAKING
AND BROILING
• It is normal for the fan to automatically run while the
oven is in use and for some time after during cooling.