Ancona Gourmet 24", Руководство пользователя и инструкции по установке

Страница: 20 / 39

— 20 —
STEP 5 (Continued)
Liquefied Petroleum (Propane)
Gas Conversion
Testing Flame Stability
am
Test 1 : Turn a burner knob from High ( ) to Low
( ) quickly. If the upper row of flames goes out at
this setting, increase the flame size and test again.
Repeat for all burners.
Test 2 : With a burner knob set to Low ( ), open and
close the cabinet door under the range. If the flame
is extinguished by the air currents created by the
door movement, increase the flame height and test
again. Repeat for all burners.
an
After the adjustment is made, turn all burners off.
Ignite each burner individually. Observe the flame
with each burner knob in the High ( ) position.
Rotate the knob to the lowest setting and make sure
that the flame size decreases as the knob is rotated
counter-clockwise.
Adjust the height of top burner flames. When a
burner knob is set to Low ( ) , the burner flame
should be a steady blue flame approximately 1/4”
(0.64 cm) over burner cap.
Electrical Specifications
WARNING:
Once the conversion has been completed and
has passed testing, fill out the conversion sticker
and include your name, organization and the date
conversion is made. Apply the sticker near the
appliance gas inlet opening to alert others in the
future that this appliance has been converted. If
converting back to Natural Gas, please remove the
sticker so others know that the appliance is set to
use its original gas.
Installation
Oven Light
Upper Heating Element
Bottom Heating Element
Grill Heating Element
Convection Heating Element
Ventilator Motor
Cooling Fan
2 x 2 5 W
2450 W / 1960 W
1361 W
2560 W
1960 W
1 x 20 W
18 W
ELECTRICAL SPECIFICATIONS
SYSTEM WATTAGE