Ancona Gourmet 24", Руководство пользователя и инструкции по установке

Страница: 36 / 39

— 36 —
Care and Maintenance
u
Remove the glass cover by turning counter-
clockwise.
v
Remove the bulb by turning it counter-clockwise.
w
Replace the bulb with a 240V, 25W type e-14 bulb.
Reconnect power.
u
Turn all burners to their
highest settings and
check the flames. They
should be blue in color
and may have some
yellow tipping at the
ends of the flame when
using LP gas. Foreign
particles in the gas line
may cause an orange
flame at first, but this
will soon disappear.
v
Turn the desired burner knob to Low ( ) and
observe the flame.
w
Set two other burners to Medium. This will prevent
the upper row of flames from being set too low,
resulting in the flame being extinguished when other
burners are turned on.
x
To adjust the flame, remove the knobs; insert the
included 3/32 screwdriver through the access hole
to engage the brass slotted screw as shown. Make
the adjustment by slowly turning the screw until the
flame appearance is correct.
Test 1
: Turn the burner knob from High ( ) to Low
( ) quickly. If the flame goes out, increase the flame
size and test again.
Test 2 : With the burner knob on a Low ( ) setting,
open and close the oven door quickly. If the flame
is extinguished by the air currents created by the
door movement, increase the flame height and test
again. If the flames are too small or fluttered, open
the valve more than the original setting. If the flames
are too large, close the valve more than the original
setting.
Replacing the Light Bulb
Adjusting the Burner Flames
WARNINGS:
• Before replacing your oven light bulb, DISCONNECT
the electrical power to the range at the main fuse or
circuit breaker panel.
• Make sure oven and bulb are cooled completely.