Anchor Navi-Trac LT/CS, Руководство по установке

Страница: 9 / 16

9
Before placing frame in fi nal position, attach
frame attaching bracket to upright rear upper
splice on each rear upright.
• Remove stablizer plate, washer and hex nut from rod
on bracket.
• Insert rod into upright rear upper splice from back of
pavilion.
• Place stabilizer plate, washer and hex nut back onto
rod so that bracket stays in place. Do not tighten until
frame and fabric are completely assembled and in-
stalled. Do not use stabilizer plate at corner uprights.
Stablizer plate, washer
and hex nut
Plate for connection to
existing structure.
U-Shaped stabilizer may not
be used at corner uprights
due to fabric interference.
Stablizer plate may not
be used at corner up-
rights. Remove.
Figure 3b
Figure 3c