Copyright © 2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
TS100W support device configure two Ports. Port1 is for IP1 only, and Port 2 for IP2
only. The priority is same as the IP address.
• Device ID:
The device ID is the unique identification code which was registered in Server database.
Only those registered devices will be allowed to send data over sever, otherwise their
connection will be kicked out.
In ANBTEK Tracking Server, TS100W device has been requested to use IMEI No as device
ID only. But the TS100W device firmware also allows you to input another self-defined
Numbers as device ID if your application need.
6.1.3 Authorization Setting
In this authorization setting is defined those authorized Phone NOs. which allow to remote
access device by SMS commands, or receive alarm alerts from device.
•User A/B/C:
These 3 authorized No. are allow to receive Alarm alerts by SMS or missed calls from
TS100W device. And they also could call device Simcard directly to get into "Voice Listen-in"
mode.
•Call Center D:
This D phone No. is defined for monitoring base Emergency Call service No. By press the
device shortcuts call button, and the device will automatically call this phone NO. to open an
intercom between monitoring base and Driver
•Server SMS G:
G is used for monitoring base SMS modem No, which use to send SMS to device from server
or receive SMS from device to Server.
•Password:
This password is device access password. Any phone NO.with correct password and
command format, device will apply the commands. If no, then device will alert as "invalid
password" or " invalid Format"
