Anatomic SITT Zitzi Starfish Pro, Руководство пользователя

Страница: 28 / 48

28 User manual Zitzi Starfish Pro www.anatomicsitt.com | +46 11 16 18 00
Mounting the table
Put the table on the armrest plates
(B) and adjust width and depth of
the armrests to correct position
under the table.
Rotate the tables locking lever (A)
into position below the armrest
plate.
Changing the mounting holes
There are 3 mounting widths to choose from. To change the width, use one of the
optional mounting holes located under the padding. The locking lever is mounted in
the center hole as default.
To change the mounting hole, you must first lift the back end of the padding.
The hole markings on the rear edge shows the size of the table.
Standard table
(fits only armrest from back)
Do not lift the front of the table.
Mounting the table
Put the table on the armrest plates (B) and adjust width and depth of the armrests
to correct position under the table.
Rotate the tables locking levers (A) into position below the armrest plate.
Support table
(fits only armrest from back)
B A
A
B
Do not lift the front of the
support table.