10
User manual Zitzi Active
www.anatomicsitt.com | +46 11 16 18 00
Chest harness
Mounting, upper mounting bracket - A
Begin with take away the integrated allen
key that originally is place in the top of the
back profile. Then push the upper mounting
brackets (A) to desired position in the track
of the back profile.
Adjustments of the upper mounting
brackets
Loosen the bolts and make desired
adjustments. The height of the upper
mounting brackets should be place so that
the pull direction is a bit above the shoulder
area. Tighten the bolts.
Mounting of harness
Pull the strap through the track and into
the buckle. Then thread the harness lower
attachment points into the lower bracket
(B). Use attached Tri-glide buckles (E).
Adjusting the pull direction and width
Loosen the bolt of the upper mounting
bracket and adjust to desired height.
Tighten the upper bolt.
Adjust the angle to desired position and
tighten the bolt.
Upper mounting bracket
Lower brackets included 1
piece as standard
Be sure that there is enough space for the
neck, that the cushions are in the right
place and that the pressure is correct!
!
!
A
B
E
= Adjustment bolts
