SPECORD
®
Care, maintenance, lamp change
Care and maintenance
8
Care, maintenance, lamp change
8.1
Care and maintenance
The SPECORD
®
is largely free of maintenance.
To ensure your laboratory certification with device validation, Analytik Jena AG offers
you a service/maintenance agreement.
User care and maintenance is limited to the following operations:
•
Cleaning of sample compartment and device casing
•
Lamp change
•
Change of line fuses
•
Change of desiccator
You should only use spares from Analytik Jena AG.
You can order consumables and wear parts by phone from our Service Department:
Hotline No.: + 49 3641-77-7407
In the case of malfunction of the device, please contact our Service Department. For the
address, refer to the
→
inside cover page.
8.2 Cleaning
Avoid keeping filled cells unnecessarily long in the sample compartment to prevent the
spectrometer from being affected by any solvent vapors.
Wipe off spilt samples in the sample compartment or on accessory units instantly with
cleaning tissue.
Wipe off contamination on the instrument with a soft, clean cloth slightly moistened with
a commercially available, neutral detergent.
SPECORD
®
200/205/210/250 User's Manual – Edition 04/2005
Page 31
Analytik Jena AG
