Analytic Systems BCA1000R, Руководство по установке и эксплуатации

Страница: 4 / 16

4
v. NEVER smoke or allow a spark or flame in vicinity of battery or engine.
vi. Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark
or short-circuit battery or other electrical part that may cause explosion.
vii. Remove personal metal items such as rings, bracelets, necklaces, and watches
when working with a lead-acid battery. A lead-acid battery can produce a short-
circuit current high enough to weld a ring or the like to metal, causing a severe burn.
viii. NEVER charge a frozen battery.
ix. If necessary to remove battery from service, always remove grounded terminal from
battery first. Make sure all accessories in the vessels are off, so as not to cause an
arc.
x. Be sure area around battery is well ventilated.
xi. Clean battery terminals. Be careful to keep corrosion from coming in contact with
eyes.
xii. Study all battery manufacturer’s specific precautions such as removing or not
removing cell caps while charging and recommended rates of charge.
xiii. Add distilled water in each cell until battery acid reaches level specified by battery
manufacturer. This helps purge excessive gas from cells. Do not overfill. For a
battery without cell caps, carefully follow manufacturer’s recharging instructions.
GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS —
The plug must
be plugged into an outlet that is properly installed and grounded in accordance with al local
codes and ordinances.
DANGER —
Never alter AC cord or plug provided — if it will not fit outlet, have proper
cord installed by a qualified electrician. Improper connection can result in a risk of an electric
shock.
Analytic Systems does not recommend the use of the BCA1000R Series Battery Chargers
in life support applications where failure or malfunction of this product can be reasonably
expected to cause failure of the life support device or to significantly affect its safety or
effectiveness. Analytic Systems does not recommend the use of any of its products in direct
patient care.
Examples of devices considered to be life support devices are neonatal oxygen analyzers,
nerve stimulators (whether used for anesthesia, pain relief, or other purposes), autotransfu-
sion devices, blood pumps, defibrillators, arrhythmia detectors and alarms, pacemakers,
hemodialysis systems, peritoneal dialysis systems, neonatal ventilator incubators, ventilators
for both adults and infants, anesthesia ventilators, and infusion pumps as well as any other
devices designated as “critical” by the U.S. FDA.