The four user presets of the
Smart Vu
can be called back at any
stage during your show or event.
1/ Press the PRESET button, then press one of the four first Input
Selection section buttons to choose which memory (1-4) you wish to
use. The preset will be displayed on your preview screen.
2/ Once you have selected your preset, simply press the TAKE
button to view the result on your main screen.
The
Smart Vu
allows to work with up to 5 stereo inputs, 1 auxilary
input, all accessible via the
Audio
menu of the
Smart Vu
, and which
can be affected to one or both of the 2 independant symetrical/
asymetrical outputs of the device.
To configure audio settings of the
Smart Vu
, plug all audio inputs
into the device, and navigate to the
Audio
menu.
1/ Choose the audio mode,
Break Away
or
Top Layer Follow
, which
you wish the audio to work in.
* NOTE * : the
Break Away
mode will air the selected audio source,
while the
Top Layer Follow
mode will air audio from the toptmost
active layer of the
Smart Vu
.
2/ Select
Source Settings
from the
Audio
menu to select the audio
source you wish to work with, then set levels and left/right balance
for each input.
3/ Select
Auxiliary Settings
to determine level and balance of the
auxilary input.
4/ Select the
Main Output
menu to determine main audio output
level, balance and delay settings, or to mute main audio output.
5/ Select
Audio Prelist
, from the
Audio
menu, to determine pre-
listen audio output level, balance and delay settings, for each audio
input, or to mute Prelist audio output.
6/ Select
Delay Mode
, to determine how the
Smart Vu
deals with
audio delay. Select
Auto Adjust
to let the
Smart Vu
determine
audio output delay. Select
Manual Adjust
to determine audio delay
manualy.
*NOTE* : selecting
Manual Adjust
will give access to audio delay
value (in milliseconds) of the main audio output menus.
Working with Presets
Working with Audio
Audio configuration
33
