Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
QUATTRO
PAGE 24
5
[AUDIO] +
ENTER.
5-1 [Master volume] +
ENTER.
Adjust the audio output level with
+
ENTER.
5-2 [Audio mode] +
ENTER.
Select the output audio mode with
+
ENTER.
•
[Mono]:
Set the output in mono mode.
•
[Stereo]:
Set the output in stereo mode.
5-3 [Audio source] +
ENTER.
Select an item with
+
ENTER
:
•
[Auto follow]
: The audio follows the video image.
•
[Input --]
: The selected audio input is permanently diffused.
5-4 [Audio level] +
ENTER.
This function allows to separately adjusting the level of each audio input. Adjust the level with
+
ENTER.
NOTE
: This function acts on the selected (diffused) audio input.
5-5 [Audio balance] +
ENTER.
This function allows adjusting for each input the audio balance. Adjust the level with
+
ENTER.
NOTE
: This function acts on the selected (diffused) audio input.
5-6 [Mute off] +
ENTER.
Switch ON or OFF the audio output
.
Validate with
ENTER
.
6
[CONTROL] +
ENTER.
6-1 [Versions] +
ENTER.
Version _._= update version.
I1 to I4 = Identification number.
K, A, B, C, O = status of the internal firmware versions.
6-2 [Transition] +
ENTER.
Select an item with
+
ENTER
6-2-1 [Fade color] +
ENTER.
This function allows selecting the color of the fade during the transition. Select a color (red, green and bleu)
with
+
ENTER
and adjust the level with
+
ENTER
. During the adjustment the color is
displayed onto the output. To obtain the black color, set the 3 levels to the minimum. To obtain the white
color, set the 3 levels to maximum. To obtain the grey color, set the 3 levels in the middle.
6-2-2 [Clean cut] +
ENTER
.
This function allows a clean switching thanks to a fast freeze of the displayed source. Select a function with
+
ENTER
.
•
[From computer]:
The CLEAN CUT operates only when switching from a computer source. The
others switching operates with a fade color.
•
[From video]:
The CLEAN CUT operates only when switching from a computer source. The others
switching operates with a fade color.
•
[From all]:
The CLEAN CUT operates when switching from all sources.
6-3 [Sync loss] +
ENTER
.
Allows to display a frame or a source in case of sync-loss of the selected input. Select an items with
+
ENTER
6-4 [RS232/LAN port] +
ENTER.
Select the needed communication port with
+
ENTER.
•
[RS232]:
Enables the RS-232 communication port. (Default setting).
•
[LAN]:
Enables the LAN communication port.
IMPORTANT:
To avoid addresses conflict, configure the LAN communication port (with the
LAN setup
menu)
before activates it.
NOTE:
The RS-232 & the LAN communication ports can not be used simultaneously.
Содержание QTA401
Страница 1: ...ANALOG WAY QUATTRO EDITION 10 06 MODEL QTD402 MODEL QTA401 User s Manual Manuel Utilisateur...
Страница 34: ......
