Chapter 6 : LCD FUNCTIONS DESCRIPTION (continued)
OCTO range
PAGE 24
6
[
LOGOS/FRAME
]
+
ENTER
(available on the OCTO-LOGO
™
and the OCTO-FX
™
only).
6-1
[
use logo/frame
]
+
ENTER.
Select an item with
+
ENTER.
6-1-1
[
display
]
+
ENTER.
This function allows to display ON or OFF the assigned logos of each input. Select an input with
and
press
ENTER
to display ON or OFF.
NOTE
: To display a logo or a frame, the output format should be the same that the output format used
during the storing.
6-1-2
[
assignment
]
+
ENTER.
This function allows assigning the stored frame and the logos to the inputs of the OCTO-LOGO
™
(up to 2
logos at the same time).
c
Select an input with
+
ENTER.
d
Select the
INDEX 1
or the
INDEX 2
with
+
ENTER.
e
Then select a logo, frame or none with
+
ENTER.
f
Adjust the logo position with
H& V position
functions.
6-1-3
[
fade duration
]
+
ENTER.
This function allows adjusting the fade duration of the logo when you display ON or OFF a logo. Adjust the
duration with
and validate with
ENTER.
6-2
[
record logo
]
+
ENTER.
This mode allows storing up to 8 logos in order to incrust them into the displayed image (up to 2 logos at a same
time). Select an item with
+
ENTER.
6-2-1
[
H position
]
+
ENTER.
Adjust the Horizontal position of the logo area with
+
ENTER.
6-2-2
[
V position
]
+
ENTER.
Adjust the Vertical position of the logo area with
+
ENTER.
6-2-3
[
H size
]
+
ENTER.
Adjust the Horizontal size of the logo area with
+
ENTER.
6-2-4
[
V size
]
+
ENTER.
Adjust the Vertical size of the logo area with
+
ENTER.
NOTE
: The logo area is limited at an eighth (1/8) of the displayed area.
6-2-5
[
luma key level
]
+
ENTER.
This function allows to "erase" the darkest portions of your logo area in order to make special logo contour.
Adjust the luma key level with
+
ENTER.
6-2-6
[
back. color
]
+
ENTER.
This function allows coloring the "erased portions" of the logo when using the luma key. Select a level with
+
ENTER.
6-2-7
[
store
]
+
ENTER.
This function allows storing the logo into one of the 8 memories. Select a logo memory with
+
ENTER.
The memorization will take few seconds.
6-3
[
record frame
]
+
ENTER.
This mode allows storing a frame in order to display it at any time during the show.
6-3-1
[
store
]
This function allows storing the displayed image (frame) into a memory. Presses ENTER
to start the
memorization of the frame. The memorization will take about 2 minutes.
6-4
[
erase mode
]
+
ENTER.
This function allows erasing the memorized frame and/or the logos. Select an item with
+
ENTER.
Содержание OCP802
Страница 44: ......
