Chapter 10 : CONTROL SOFTWARE (continued)
HD SCAN™
PAGE 18
10-3. SOFTWARE SET UP
c
Select the
Serial port
in the
Controls
menu.
The HD SCAN
™
is now connected to the control device. Make a
Default value
(
Control
menu) if necessary.
d
In the
Input
menu:
- Set the H sync load of the input.
- Select "YES" in the SOG Input section if your input is a RGsB (SOG) source.
e
In the
Output
menu, select an
Output format
, an
Output rate
mode and an
Output Sync
type.
