QUICK START GUIDE – BROAD SCAN (HD/SDI)
ANALOG WAY
EDITION : 07/07
CONNECTIONS:
c
Turn OFF all of your equipment before connecting.
d
Connect the AC power supply cord to the BROAD SCAN and to an AC power outlet.
e
Connect your computer sources to the COMPUTER INPUT (HD15) connector or the DVI-D INPUT connector.
f
As required, connect a control monitor on the MONITOR OUT (HD15 or DVI-D) connector.
NOTE:
The analog (RGB) MONITOR OUT is available only if the COMPUTER source is analog.
NOTE:
The DVI-D MONITOR OUT is available only if the COMPUTER source is DVI-D.
g
Connect your display device (TV monitor, VCR...) to the outputs (analog or SDI*).
h
Turn ON the BROAD SCAN (rear panel switch). Then turn ON your input source and then your display devices.
* The SDI outputs are available on BHD930 & BSD830 models only.
•
Example of connection (Model: BHD930-AG):
3
4
5
5
5
4
2
6
•
RGB/COMPONENT output connection:
SETTINGS:
c
We recommend resetting the BROAD SCAN to all of its default values, with the front panel display
menu
(
CONTROL
default value
yes
) before proceeding.
d
Select the auto-setting menu with the front panel display
menu (
INPUT
Auto setting
) and activate this function with
ENTER. This function detects automatically the input type of the source connected to the input connectors (DVI &
RGB). Then the device performs an auto-centering function.
e
Select the Input status menu
(INPUT
Input status
) to verify the correct detection of the type and format of your input
source. If a wrong message is displayed, select manually the type of your input source (
INPUT
Input Type
).
f
Select the output format and rate (
OUTPUT
Format
).
g
For SDTV output format (PAL, NTSC) select the type of the
RGB/YCrCb output
(
OUTPUT
Type
).
h
Perform the needed image adjustments, available in the
IMAGE
menu.
