Jumper and Switch Settings
2-16
ADSP-BF538F EZ-KIT Lite Evaluation System Manual
ELVIS Voltage Selection Jumper (JP6)
The ELVIS voltage selection jumper (
JP6
) is used to select the power
source for the EZ-KIT Lite. In a standard mode of operation, the board
receives its power from an external power supply. When
JP6
is installed,
the board is powered from an ELVIS station, and no external power sup-
ply is required. The jumper setting is shown in
[
The external power supply must be disconnected from the board
when
JP6
is installed. Otherwise, the power supply can cause dam-
age to the EZ-KIT Lite board and ELVIS unit.
ELVIS Select Jumper (JP8)
The ELVIS select jumper (
JP8
) configures the EZ-KIT Lite’s connection
to an ELVIS station (see
“ELVIS Interface” on page 1-12
JP8
is
installed, the connections to the push buttons and LED are re-directed to
the ELVIS station, instead of the processor. The jumper setting is shown
in
.
Table 2-12. ELVIS Voltage Selection Jumper (JP6)
JP6 Setting
Mode
OFF
Powered from an external power supply (default)
ON
Powered from an ELVIS station
Table 2-13. ELVIS Select Jumper (JP8)
JP8 Setting
Mode
OFF
Not connected to an ELVIS station (default)
ON
Connected to an ELVIS station
Содержание EZ-KIT Lite ADSP-BF538F
Страница 5: ......
Страница 23: ...Notation Conventions xxii ADSP BF538F EZ KIT Lite Evaluation System Manual ...
Страница 63: ...Connectors 2 26 ADSP BF538F EZ KIT Lite Evaluation System Manual ...
Страница 90: ......