Analog Devices EZ-KIT Lite ADSP-BF538F, Системное руководство

Страница: 34 / 102

ADSP-BF538F EZ-KIT Lite Evaluation System Manual 1-11
Using ADSP-BF538F EZ-KIT Lite
Example code is provided in the EZ-KIT Lite installation directory to
demonstrate how to program flash memory.
Table 1-4 shows a sample value for the asynchronous memory configura-
tion register,
EBIU_AMBCTL0
.
CAN Interface
The Controller Area Network interface contains a Philips TJA1041
high-speed CAN transceiver. The
PD9
programmable flag connects to the
error and power-on indication output (
ERR
). The
PC1
of the processor con-
nects to the receive data output (
RXD
), and
PCO
connects to the transmit
data input (
TXD
).
The CAN interface can be disconnected from the processor by turning
positions
1
though
4
of the
SW2
switch
OFF
. When in the
OFF
position, the
signals can be used elsewhere on the board. See “CAN Enable Switch
(SW2)” on page 2-10 for more information.
The CAN interface contains two 4-position modular connectors (see
“CAN Connectors (J5 and J11)” on page 2-21 ).
Example programs are included in the EZ-KIT Lite installation directory
to demonstrate CAN circuit operation.
Table 1-4. Asynchronous Memory Control Register Setting Example
Register Value Function
EBIU_AMBCTL0 0x7BB07BB0
Timing control for banks 1 and 0