Analog Devices EVAL-SSM6515, Руководство пользователя

Страница: 14 / 23

User Guide EVAL-SSM6515
SETTING UP THE EVALUATION BOARD
analog.com Rev. 0 | 14 of 23
Figure 25. PDM Configuration
DEFAULT SWITCH AND JUMPER SETTINGS (S/
PDIF INPUT, STANDALONE MODE)
To configure the EVAL-SSM6515Z for standalone mode, refer to
Table 3 and set the desired input I
2
S or PDM mode using Table 5 .
Configure J13 accordingly. If using the on board S/PDIF receiver
I
2
S input, insert the jumpers as shown in Figure 18 . If using the
external I
2
S input, refer to Figure 24 for J13. If using the PDM
source, connect only the PDM data and PDM clock at Pin 2 and Pin
8 of J13, respectively. Leave Pin 5 (center) unconnected.