EVAL-AD7605-4SDZ/EVAL-AD7606SDZ/EVAL-AD7607SDZ/EVAL-AD7608SDZ User Guide
UG-851
Rev. A | Page 7 of 15
Installing the SDP Board Drivers
After the
AD7606
evaluation board software installation is
complete, the ADI SDP Drivers Setup wizard window opens
for the installation of the
EVAL-SDP-CB1Z
SDP board drivers.
1.
The ADI SDP Drivers Setup Wizard opens. Click Next to
begin the driver installation process (see Figure 6).
Figure 6. Setup Wizard Welcome Window
2.
Select a destination folder for the SDP drivers and click
Install (see Figure 7).
Figure 7.
Choose Install Location
Window
3.
Click Install again to proceed with the installation (see
Figure 8).
Figure 8.
Windows Security
Dialog Box
4.
When the SDP drivers installation completes, click Finish
(see Figure 9).
Figure 9. Completion of Installation Window
After the evaluation software installation is complete, connect the
EVAL-AD7605-4SDZ
/
EVAL-AD7606SDZ
/
EVAL-AD7606-6SDZ
/
EVAL-AD7606-4SDZ
/
EVAL-AD7607SDZ
/
EVAL-AD7608SDZ
evaluation board to the
EVAL-SDP-CB1Z
SDP board as described
in the Evaluation Board Hardware section.
When first plugging in the
EVAL-SDP-CB1Z
SDP board via
the USB cable provided, allow the Found Hardware Wizard
to run. After the drivers are installed, check that the evaluation
board is connected correctly by looking at the Device Manager
of the PC. The Device Manager can be found by right-clicking
My Computer > Manage > Device Manager from the list of
System Tools.
The
EVAL-SDP-CB1Z
SDP board appears under ADI
Development Tools, shown in Figure 10.
Figure 10. Device Manager
13283-
007
13283-
008
13283-
009
13283-
010
13283-
0
1
1
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
