Analog Devices EVAL-AD7386FMCZ, Руководство пользователя

Страница: 9 / 21

EVAL-AD7386FMCZ User Guide UG-1615
Rev. A | Page 9 of 21
Verifying the Board Connection
Take the following steps to verify the board connection:
1.
Allow the Found New Hardware Wizard to run after the
EVAL-SDP-CH1Z board is plugged into the PC. If using
Windows XP, search for the EVAL-SDP-CH1Z drivers.
Choose to automatically search for the drivers for the
EVAL-SDP-CH1Z board if prompted by the operating
system.
2. Ensure that the EVAL-AD7386FMZ evaluation board is
connected to the PC correctly by using the
Device
Manager window. A dialog box may appear asking for
permission to allow the program to make changes to the
computer. Click
Yes . The Computer Management window
will appear. From the System Tools list, click Device
Manager .
3. If the EVAL-SDP-CH1Z driver software is installed, and
the EVAL-SDP-CH1Z board is connected to the PC
correctly, Analog Devices SDP-H1 appears nested under
the ADI Development Tools in the Device Manager
window, as shown in Figure 11.
2
1
193-
0
1
1
Figure 11. Device Manager Window
Disconnecting the EVAL-AD7386FMCZ
Before removing the EVAL-AD7386FMCZ evaluation board,
always remove power from the
EVAL-SDP-CH1Z or push the
reset tact switch on the EVAL-SDP-CH1Z , located alongside the
mini USB port.