UG-1615
Rev. A | Page 15 of 21
Waveform Results
Waveform Results
displays amplitude, sample frequency, and
noise analysis data for the selected channels.
Export Capture Data
Click
Export
to export the captured data. The waveform,
histogram, and FFT data are stored in .xml files along with the
values of parameters at capture.
Waveform Graph
The data
Waveform
graph shows each successive sample of the
ADC output. The user can zoom and pan the waveform using
the embedded waveform tools. The channels to display can be
selected in the
Display Channels
section.
Display Units and Axis Controls
Click the display units dropdown list to select whether the data
graph displays in units of hexadecimal, volts, or codes. The axis
controls are dynamic.
When selecting either y-scale dynamic or x-scale dynamic, the
corresponding axis width automatically adjusts to show the
entire range of the ADC results after each batch of samples.
Histogram Tab
The
Histogram
tab contains the histogram graph and the
results pane, as shown in Figure 20.
RESULTS Pane
The
RESULTS
pane displays the information related to the dc
performance.
Histogram Graph
The histogram graph displays the number of hits per code within
the sampled data. This graph is useful for dc analysis and indicates
the noise performance of the device.
2
1
193-
019
Figure 19.
Waveform
Tab
2
1
193-
020
Figure 20.
Histogram
Tab
