UG-855
EVAL-AD7124-4SDZ User Guide
Rev. 0 | Page 4 of 29
EVAL-AD7124-4SDZ
QUICK START GUIDE
To begin using the evaluation board, do the following:
1.
With the
EVAL-SDP-CB1Z
board disconnected from the
USB port of the PC, install the
AD7124-4 EVAL+ Software
(the software is included on the CD in the evaluation kit,
or it can be downloaded from the Analog Devices website).
The PC must be restarted after the software installation is
complete. (For complete software installation instructions,
see the Software Installation Procedures section.)
2.
Connect the
EVAL-SDP-CB1Z
board to the
EVAL-
AD7124-4SDZ
board.
3.
Screw the two boards together using the plastic screw and
washer set included in the evaluation board kit to ensure
that the boards are connected firmly together.
4.
Apply an external voltage in the range of 7 V to 9 V to the
J3 or J5 connecter of the
EVAL-AD7124-4SDZ
board. This
provides the power supply for the board.
5.
Connect the
EVAL-SDP-CB1Z
board to the PC using the
supplied USB cable. If you are using Windows® XP, you
may need to search for the
EVAL-SDP-CB1Z
drivers.
Choose to automatically search for the drivers for the
EVAL-SDP-CB1Z
board if prompted by the operating
system.
6.
From the
Programs
menu, go to the
Analog Devices
subfolder, and click
AD7124 Eval+
to launch the
AD7124-4
EVAL+ Software
(see the Launching the Software section
for further details).
13
304
-0
02
Figure 2. Hardware Configuration, Setting Up the
EVAL-AD7124-4SDZ
Evaluation Board
Содержание EVAL-AD7124-4SDZ
Страница 21: ...EVAL AD7124 4SDZ User Guide UG 855 Rev 0 Page 21 of 29 13304 027 Figure 27 Schematic Power Supply ...
Страница 22: ...UG 855 EVAL AD7124 4SDZ User Guide Rev 0 Page 22 of 29 13304 028 Figure 28 Schematic Regulators ...
Страница 23: ...EVAL AD7124 4SDZ User Guide UG 855 Rev 0 Page 23 of 29 13304 029 Figure 29 Schematic SDP ...
