Analog Devices EVAL-AD7124-4SDZ, Руководство пользователя

Страница: 11 / 29

EVAL-AD7124-4SDZ User Guide UG-855
Rev. 0 | Page 11 of 29
3. Click Install to confirm that you want to install the drivers.
13
30
4
-01
2
Figure 12. EVAL-SDP-CB1Z Drivers Setup:
Granting Permission to Install Drivers
4. To complete the drivers installation, click Finish , which
closes the setup wizard.
133
04
-01
3
Figure 13. EVAL-SDP-CB1Z Drivers Setup:
Completing the Drivers Setup Wizard
5. Before using the evaluation board, you must restart the PC.
1
330
4-
0
14
Figure 14. EVAL-SDP-CB1Z Drivers Setup:
Restarting the PC
Setting Up the System for Data Capture
After completing the steps in the Software Installation
Procedures and Evaluation Board Hardware sections, set up the
system for data capture as follows:
1. Allow the Found New Hardware Wizard to run after the
EVAL-SDP-CB1Z board is plugged into your PC. (If you
are using Windows XP, you may need to search for the
EVAL-SDP-CB1Z drivers. Choose to automatically search
for the drivers for the EVAL-SDP-CB1Z board if prompted
by the operating system.)
2. Check that the board is connecting to the PC correctly
using the
Device Manager of the PC.
3. Access the
Device Manager
as follows:
a. Right-click My Computer and then click Manage .
b. A dialog box appears asking for permission to allow
the program to make changes to your PC. Click
Yes .
c. The Computer Management window appears. From
the list of
System Tools
, click
Device Manager
(see
Figure 15).
d. The EVAL-SDP-CB1Z board should appear under
ADI Development Tools , which indicates that the
driver software is installed and that the board is
connecting to the PC correctly.
13
30
4-
0
15
Figure 15. Device Manager:
Checking that the Board Is Connected to the PC Correctly