Analog Devices EVAL-AD4114, Руководство пользователя

Страница: 14 / 24

UG-1819 EVAL-AD4114SDZ User Guide
Rev. 0 | Page 14 of 24
Device Error
The Device Error indicator (Label 21 in Figure 18) illuminates
in the Voltage Waveform tab and Ch Waveform tab when a
cyclic redundancy check (CRC) error or an error in the ADC is
detected. More specific information on the error can be found
by clicking Summary in the Configuration tab (Label 11 in
Figure 16).
Analysis Input
The Noise Analysis box shows the analysis of the input selected
via the analysis control (Label 22 in Figure 18).
Noise Analysis
The noise analysis area (Label 23 in Figure 18) displays the
results of the noise analysis for the selected analysis input,
including both noise and resolution measurements.
Input Range
The Range box (Label 24 in Figure 18) is an indicator in quick
start mode. The value is selected in the Inputs area on the
Configuration tab (Label 1 in Figure 16). In advanced mode,
Range is a control that allows the user to select an input range
for the input chosen for noise analysis.