manualshive.com logo in svg

Analog Devices Blackfin ADSP-BF537, Справочник по аппаратуре

Поделиться
Скачать
Analog Devices Blackfin ADSP-BF537 Скачать руководство пользователя страница 78

Real-Time Clock

1-20

ADSP-BF537 Blackfin Processor Hardware Reference

 

dedicated DMA channels, one for transmit and one for receive. 
These DMA channels have lower priority than most DMA chan-
nels because of their relatively low service rates.

The UARTs’ baud rate, serial data format, error code generation and sta-
tus, and interrupts can be programmed to support:

• Wide range of bit rates

• Data formats from 7 to 12 bits per frame

• Generation of maskable interrupts to the processor by both trans-

mit and receive operations

In conjunction with the general-purpose timer functions, autobaud detec-
tion is supported.

The capabilities of the UART ports are further extended with support for 
the Infrared Data Association (IrDA

®

) Serial Infrared Physical Layer Link 

Specification (SIR) protocol.

Real-Time Clock

The processor’s Real-Time Clock (RTC) provides a robust set of digital 
watch features, including current time, stopwatch, and alarm. The RTC is 
clocked by a 32.768 kHz crystal external to the processor. The RTC 
peripheral has dedicated power supply pins, so that it can remain powered 
up and clocked even when the rest of the processor is in a low power state. 
The RTC provides several programmable interrupt options, including 
interrupt per second, minute, hour, or day clock ticks, interrupt on pro-
grammable stopwatch countdown, or interrupt at a programmed alarm 
time.

Содержание Blackfin ADSP-BF537



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды