manualshive.com logo in svg

Analog Devices Blackfin ADSP-BF537, Справочник по аппаратуре

Поделиться
Скачать
Analog Devices Blackfin ADSP-BF537 Скачать руководство пользователя страница 59

ADSP-BF537 Blackfin Processor Hardware Reference

1-1 

 

1 INTRODUCTION

The ADSP-BF534, ADSP-BF536, and ADSP-BF537 processors are new 
members of the Blackfin processor family that offer significant high per-
formance and low power while retaining their ease-of-use benefits. The 
ADSP-BF536 and ADSP-BF537 processors are completely pin compati-
ble, differing only in their performance and on-chip memory, mitigating 
many risks associated with new product development but allowing the 
possibility to scale up or down based on specific application demands. The 
ADSP-BF534 processor is pin compatible with the ADSP-BF536 and 
ADSP-BF537, but it does not include the embedded Ethernet controller 
like the ADSP-BF536 and ADSP-BF537 devices.

Peripherals

The processor system peripherals include:

• IEEE 802.3-compliant 10/100 Ethernet MAC (Not included on 

the ADSP-BF534)

• Controller Area Network (CAN) 2.0B interface

• Parallel Peripheral Interface (PPI), supporting ITU-R 656 video 

data formats

• Two dual-channel, full-duplex synchronous Serial Ports 

(SPORTs), supporting eight stereo I

2

S channels 

• 12 peripheral DMAs (2 mastered by the Ethernet MAC on 

ADSP-BF536 and ADSP-BF537 processors)

Содержание Blackfin ADSP-BF537



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды