ADSP-SC589 EZ-Board® Evaluation System Manual
36
3.3.4 JTAG Interface Switches (SW6–7)
The JTAG switches (SW6-7) select between single processor (one board) and multiprocessor (more
than one board) configurations. By default, the switches are set up for a single EZ-Board
configuration.
Switch Position Single EZ-Board Use (Default)
SW6.1
ON
SW6.2
OFF
SW6.3
ON
SW6.4
OFF
SW6.5
ON
SW6.6
OFF
SW7.1
ON
SW7.2
OFF
SW7.3
ON
SW7.4
OFF
SW7.5
OFF
SW7.6
OFF
To use an emulator and multiple EZ-Boards simultaneously in one CrossCore Embedded Studio
(CCES) session, set up the boards as shown below. Attach the boards to each other through
connectors J8 and J9. Connect using the Samtec cables described in .
Switch Position Main EZ-Board Attached to Emulator
EZ-Board Not Attached to Emulator
SW5.1
ON
OFF
SW5.2
ON
ON
