ADSP-SC589 EZ-Board® Evaluation System Manual
15
2.1 Package Contents
Your ADSP-SC589 EZ-Board package contains the following items.
ADSP-SC589 EZ-Board PCB
Universal 5V DC power
Ethernet cable
USB A to micro B cable
USB micro A to A receptacle cable
ICE-1000 (only in the EZ-KIT Lite version)
Standoffs and screws in a bag
Release note
2GB SD card
Contact the vendor where you purchased your EZ-Board or contact Analog Devices, Inc. if any item
is missing.
2.2 ADSP-SC589 EZ-Board
The ADSP-SC589 EZ-KIT Lite is shipped with an ICE-1000 emulator. When the product is not
shipped with the debugger, it is referred to as the ADSP-SC589 EZ-Board.
The EZ-Board requires an ICE-1000 or ICE-2000 emulator.
2.3 Default Configuration
The ADSP-SC589 EZ-Board is designed to run as a standalone unit.
The image below shows the default jumper settings, connector locations, and LEDs used in
installation. Confirm that your board is in the default configuration before using the board.
