Analog Devices ADSP-BF592 EZ-KIT Lite, Руководство пользователя

Страница: 26 / 78

Vi+ Install and Session Startup
1-8 ADSP-BF592 EZ-KIT Lite Evaluation System Manual
Vi+ Install and Session Startup
For information about Vi+ and to download the software, go to
www.analog.com/VisualDSP
.
There are two options to connect the EZ-KIT Lite hardware to a personal
computer (PC) running Vi+: via an Analog Devices emulator or
via the onboard debug agent.
To connect the EZ-KIT Lite to a PC via an emulator:
1. Plug the 5V adaptor into connector
P9
(labeled
5V
) or plug the
USB cable into connector
ZP1
(labeled
USB
).
2. Attach the emulator to the header connector
P2
(labeled
JTAG
) on
the EZ-KIT Lite.
To connect the EZ-KIT Lite to a PC via the debug agent:
1. Plug one side of the provided USB cable into the USB connector of
the debug agent
ZP1
(labeled
USB
). Plug the other side of the cable
into a USB port of the PC running Vi+.
2. Verify that the yellow USB monitor LED on the debug agent,
ZLED2
, is lit. This signifies that the board is communicating prop-
erly with the host PC and ready to run Vi+.
Session Startup
1. If you are running Vi+ for the first time, navigate to the
Vi+ environment via the Start > Programs menu. The
main window appears. Note that Vi+ is not connected to
any session. Skip the rest of this step to step 2.