Analog Devices ADP5062, Руководство пользователя

Страница: 6 / 15

UG-500 Evaluation Board User Guide
Rev. 0 | Page 6 of 15
109
93-
0
1
4
Figure 4. ADP5062 Evaluation Software GUI, Register R/W Tab
DIRECT REGISTER READ AND WRITE
It is possible to read and write the content of each register using
the
Register R/W tab as indicated in the GUI. Click READ
ALL to update the contents of each register in the GUI. A single
register read or write can be done using the controls on the
right side of the
Register R/W tab of the GUI. Type the I
2
C sub
address in the Sub Address for READ and WRITE (0x00) box,
and then press ENTER . Click READ to read the binary data, or
click WRITE to write the binary data. Type the binary data for
an I
2
C write, and then press
ENTER
. Note that some registers,
such as Register 0x00 and Register 0x01, are read only registers
and cannot be overwritten.