Evaluation Board User Guide
UG-500
Rev. 0 | Page 3 of 15
EVALUATION BOARD SOFTWARE
INSTALLING
ADP5062
EVALUATION SOFTWARE
Before installing the ADP5062 evaluation software, the drivers for
the USB-SDP-CABLEZ must be installed. The software and the
instructions can be obtained from www.analog.com/usb-sdp-
cablez.
After proper installation of the USB-SDP-CABLEZ drivers, insert
the
ADP5062
-EVALZ setup CD and run the
Setup.exe
file by
following the steps provided in the software installation instruction
document.
