R e v 1 . 1
| Page
22
•
While in
PHY_Tx
with SPORT mode enabled, the transmitted data must synchronized with the output clock
seen on the
CLK
SMA connector on the mother board as shown in (
Figure 30
)
•
The Tx data line, from the users Tx device, should be connected to the
DT
SMA connector as shown in
(
Figure 30
).
Figure 30
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from