R e v 1 . 1
| Page
15
Mother Board Firmware Version
The Motherboard firmware revision check is done automatically when “Connect USB” is clicked. If the firmware revision
is not correct a popup screen will appear asking the user to update the Firmware (
Figure 20
).
Figure 20
To manually check the firmware after connecting the USB select
Help
->
Check Firmware Revision
as shown in
Figure 21
Error! Reference source not found.
.
If this value is less than 02.00.02.05 then the firmware version will need to be updated.
Firmware update procedure can be found in the
Mother Board Firmware Update
section.
Figure 21
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from