AD9959/PCB
Rev. 0 | Page 6 of 28
Windows XP Users
1.
Power up the AD9959 evaluation board (see Table 2).
2.
Connect the evaluation board to the computer using a USB
cable via the USB port. Then, the VBUS LED (CR1 on
AD9959 evaluation board) illuminates.
3.
When the USB cable is connected, the screen below
appears (Figure 7). Click
Next
to continue.
05698-
007
Figure 7.
4.
Click
Continue Anyway
when you see the window in
Figure 8.
05698-
008
Figure 8.
5.
Click
Finish
after this window (Figure 9) appears.
05698-
0
09
Figure 9.
6.
Click
Next
after you see the window below (Figure 10).
05698-
010
Figure 10.
7.
Click
Continue Anyway
when this window
(Figure 11) appears.
05698-
011
Figure 11.
