AD9959/PCB
Rev. 0 | Page 16 of 28
05698-030
Figure 30.
To access the
Debug Window
, click
View
and select
Debug
Window
(see Figure 31).
05698-031
Figure 31.
DUT I/O Box
This dialog box (Figure 32) controls the I/O configuration for
the device. Click
I/O Reset
to send an I/O reset to the
corresponding serial port state machine. Select
LSB First
to
change the data format to LSB first from the default setting of
MSB first. Use the
Serial I/O Mode
drop menu to select the
desired serial I/O mode of operation:
Single Bit-2 Wire
(default), S
ingle Bit-3 Wire
,
2-Bit Serial
,
or
4-Bit Serial
. For
more information, please refer to the Serial I/O Modes of
Operation section of the AD9959 data sheet.
05698-032
Figure 32.
To access the
DUT I/O
box, click I/O button (left of View–see
Figure 31) and select
DUT I/O
.
