EVAL-AD5696RSDZ User Guide
UG-726
Rev. C | Page 5 of 13
MEMORY MAP
All registers are fully accessible from the
AD5696R Memory
Map
tab, shown in Figure 5. To navigate to this tab, click the
Proceed to Memory Map
button, shown in Figure 4. This tab
allows registers to be edited at bit level. The bits shaded in dark
gray are read-only bits and cannot be accessed from the
ACE
software. All other bits are toggled.
Clicking the
Apply Changes
button transfers data to the device.
All changes made in the memory map tab correspond to the
block diagram. For example, if the internal register bit is enabled,
it displays as enabled on the block diagram. Any bits or registers
that are shown in bold in the memory map tab are modified
values that have not been transferred to the evaluation board
(see Figure 6). Click
Apply Changes
to transfer the data to the
evaluation board.
12
47
5-
10
5
Figure 5.
AD5696R Memory Map
Tab
12
475
-106
Figure 6.
AD5696R
Memory Map with Unapplied Changes in the
DAC0_Input
Register
