Anadol Eco 4K UHD E2 Linux Sat Receiver User Manual
Anadol ECO 4K UHD E2 Linux Sat Receiver
4
1. INTRODUCTION
1.1 Safety Instructions
The Anadol ECO has been designed and manufactured in compliance with EU consumer safety requirements (CE).
Please read the following safety precautions carefully
1. Connecting Power
•
This product operates only in the range of AC 100V~250V and 50Hz/60Hz. Please check first your power
supply to see if it fits this range.
•
Please be noted that you need to disconnect from the mains before you start any maintenance or
installation procedures.
•
Make sure that the power cord is placed in a position where it is easy to unplug it from the mains in an
emergency.
2. Overloading
•
Do not overload a wall outlet, extension cord or adapter as this may cause electrical fire or shock.
3. Liquid
•
This product is not water-proof and should not be exposed to dripping, splashing, or any type of liquid.
•
No objects filled with liquid such as base shall be placed on the product.
•
Please do not clean the product with wet cloth, which may cause a short circuit.
•
No wet objects should be placed near the product.
4. Ventilation
•
Allow a sufficient space between the product and other objects to make sure air ventilation of the product.
•
Do not block the top or rear of the product with an object, which will close the ventilation holes and lead to a
high temperature of the system. This may cause a failure of the product.
•
Do not stack other electronic devices on top of the product.
•
Do not insert any kind of pointed objects like screw, gimlet, etc. into the ventilation holes of the product.
This will damage the product.
5. Connecting the Coax Cable.
•
Disconnect the power of the product before you connect the coax cable to the product.
Otherwise, it may cause damage to the receiver.
6. Grounding
•
The coax cable and by use of a LNB it must be earthed to the system.
7. Location
•
Place the product indoor.
•
Do not expose the product to rain, sun or lightening.
•
Do not place the product near any heat appliances as a radiator or fireplace.
•
Ensure that there is more than 10 cm distance from any electrical devices & wall.
8. Lightening, Storm or Not In Use.
•
Unplug the product and disconnect the antenna cable during a thunderstorm or lightening, especially
when left unattended and unused for a long period of time. This will prevent possible damages from
power surges or lightening.
9. Replacement of Parts
•
Unauthorized part replacements, especially by one who is not a qualified technician may result in
damage to the product.
•
Ensure that when part replacements are necessary qualified technicians perform the task using the
components specified by the manufacturer.
10. Hard Disk Drive
