Anadol Eco 4K UHD E2 Linux Sat Receiver User Manual
Anadol ECO 4K UHD E2 Linux Sat Receiver
34
Use DHCP
YES is used to use DHCP (Dynamic Host Configuration Protocol). If you set this option at YES, it will automatically
detect the correct IP address. NO is used when you want to use a certain fixed IP address. In this case, you need to
enter correct addresses in each field.
2 Nameserver settings
This option is required if you selected not to use DHCP. You need to enter the address of the Nameserver.
3 Network test
When you are not sure whether the network configuration has been done correctly or not, you can run this test.
4 Restart Network
This option is used when you want to reboot the Ethernet of your Anadol ECO.
5.2.1.4 Language Selection
[
i
: MENU > Setup > System Settings > Language]
A variety of languages are available for the OSD of Anadol ECO .
