AN-Motors ASG1000/3KIT, Инструкция по установке и эксплуатации

Страница: 17 / 23

17
!
The drive is designed for operation in dry premises and cannot be applied in acid,
salty and highly explosive environment.
The drive system must be examined by service maintenance specialists regularly to ensure ef-
fective and safe operation. Planned maintenance must be carried out in accordance with the
current regulations stated in the present manual observing safety measures. Planned mainte-
nance must be carried out at least once a year or after 2000 cycles of opening/closing. While
planned maintenance it is required:
To check the wear of the set elements (chain, carriage, star wheel, doors components and
other), pay attention to the oxidation of the elements. Replace all elements and junctions
which gave an unacceptable level of wear.
Check the accuracy of doors final positions. If required, re-program final positions.
Clear the external surface of the drive and safety devices using soft damp cloth. It is
forbidden to use for cleaning: water streams, high pressure cleaners, acids or alkali.
Test the equipment using recommendations from section «Testing».
Average endurance period is 8 years with 4 cycles of «opening-closing» per day. After the
stated period it is necessary to address the manufacturer or supplier to obtain the certificate
on further operation.
!
The company does not directly control the process of installation of doors, drive and
automatic devices, their maintenance and operation and cannot be responsible for the
safety of installation, operation and technical support of the drive system.
9. DEFECTS AND RECOMMENDATIONS ON THEIR ELIMINATION
Table 8 contains the list of defects which may arise while installation and operation of the set
as well as the recommendations on their elimination.