amzchef BD7009S09+COF6601, Инструкция по эксплуатации

Страница: 20 / 102

20
Oven Light Replacement
The light used in oven is a special high temperature resistant
light
(AC220V/25W).
Therefore, it is necessary to purchase genuine light from
authorized distributors.
The replacement steps are as follows:
1.Disconnect the power supply of the power socket.
2.Turn the glass cover counterclockwise.(Figure 5)
3.Remove the light and replace it with the same type.(Figure 6)
4.After replacing the light, screw the glass cover clockwise.
Sensor Probe Replacement
The probe used in the oven is a mechanical physical probe. Do not replace it without authorization. In case of
abnormal
temperature sensing of the sensor probe, please contact the designated repair shop immediately for
replacement.
Specification
Model BD7009S09
+COF6601
Voltage 380-415V 3N~ 50/60Hz
Rated power
8600-10200W
Hob max rated
6039-7186W
Oven max rated 2800W
Rated frequency 50/60Hz
Product size(width * depth * height) 595(width
）
X565(depth
）
X650(height)
Rated volume 70L
Remove the Slide-in racks
Remove the hanger to facilitate cleaning the side wall of the oven. Note: Operate this process must by hand
slightly, or it will damage the enamel.
• Remove all accessories such as grate and baking tray.
• Slightly push down the hook in racks at the clamping point as shown (A).
• Swivel the rack inwards to an angle of approx. 45 degrees(B-C).
• Unhook it at the top and carefully pull it out (C).
• To reinstall after cleaning, follow the steps above in reverse order.