
19
•Do not use a steam cleaner to clean the oven.
•Do not use detergents or corrosive detergents to clean glass door.
•Do not use rough or friction materials or sharp metal scrapers to clean the oven glass door, as they may
scratch the surface.
■ Oven Interior
In order to maintain the oven better, after cooking, the oven should be fully cooled before cleaning.
•Take out all removable parts.
•In order to facilitate cleaning, the oven door can be removed.( Removal method refers to "Remove the
oven door" below.)
•Steam cleaners should not be used when cleaning.
Remove the Oven Door
Removable oven door allows users to fully touch the oven interior, making maintenance more convenient and fast.
①
Open
the
door
to
the
maximum
angle
and
pull
the
lock
back
at
the
hinge
of
the
door(Figure
1).
There
are
two
locks
on
both
sides
of
the
oven
door.
②
Close
the
oven
door,
at
about
15
degree,
then
lift
the
door,
and
slowly
pull
out
from
the
oven.(Figure
2)
③
After
cleaning,
perform
the
above-mentioned
operations
in
the
opposite
steps
to
restore
the
door
to
its
original
condition.
■Note: After using a specific detergent, run the oven for 15-20
minutes with maximum heating settings to remove residues in the oven.
In this process, touchable parts may be hotter than usual. Keep
children away from the oven.
Removing the telescopic runners
Removable oven door allows users to fully touch the oven interior, making maintenance more convenient and fast.
Removing the telescopic runners
For disassembly on the left side (right side mirror-inverted):
①
Press on the hooks of the telescopic slide at the points marked A
until they are released from the slide-in grid and then turn the
telescopic slide slightly counterclockwise. (2.1)
②
Lift the telescopic slide slightly so that you can remove it from the
grid without the hooks getting caught.
③
Now you can remove the telescopic slide from the oven. (2.2)
)L[LQJWKHWHOHVFRSLFUXQQHUV
For mounting on the left side (right side mirror-inverted):
①
Place the rail hooks at the points marked B on the upper guide
rail of the desired insertion level in the insertion grid and then
turn the telescopic rail clockwise. (2.3)
②
Press the rail hooks at the points marked C on the lower guide
rail until they „snap in“. (2.4)
③
Before closing the appliance door, make sure that all tele-scopic
runners are fully inserted.
Содержание BD7009S09+COF6601
Страница 13: ...13 Hob Oven connection Terminal block ...
Страница 52: ...52 PE Conducteur de protection Jaune vert 1 5mm Branchement de la plaque de cuisson et du four Bornier ...
Страница 92: ...92 PE Terminal de tierra de protección Amarillo verde 1 5 mm Conexión de fogón y horno Bloque de terminal ...